NM-T1
QSC · Microphones
Past about four metres a panel microphone stops reaching. This steers toward whoever is speaking instead.
Sixteen MEMS elements beamforming into four configurable zones. It sits on the table, takes one network cable, and gives the room call controls and a mute anyone can find without hunting for a remote.
Why we recommend it
360 degrees, in four zones
Four software-configurable beam zones give up to full-round coverage, aimed in QSC Designer rather than by moving the microphone.
One cable
Power over Ethernet, Type 1 Class 2, under 6.5W. No separate power supply on the table.
Controls on the table
Onboard call controls, a programmable button, touchless muting and an RGB ring you can colour to your own conventions.
Certified where it matters
Certified for Microsoft Teams, Google Meet and Zoom.
Specifications
| Elements | 16 MEMS, superdirective |
|---|---|
| Coverage | 4 zones, up to 360 degrees |
| Pickup range | 3 - 9 ft (1 - 3 m) |
| Frequency response | 100 Hz - 16 kHz (+/-3 dB) |
| Sampling rate | 16 kHz wideband / 48 kHz fullband |
| Bit depth | 24-bit |
| Sensitivity | -36 dBFS (94 dB SPL) |
| Maximum SPL | 118 dB SPL (1 kHz, 1% THD) |
| Dynamic range | 95 dB |
| Signal-to-noise ratio | 65 dB (48 kHz), 66 dB (16 kHz) |
| Self noise | 28 dB SPL |
| Latency | 4 ms |
| Mute | Touchless, by proximity motion sensor |
| Status light | Programmable RGB light ring |
| Call controls | Onboard, with a programmable user button |
| Call Sync | Q-SYS Call Sync compatible |
| Power | PoE Type 1 Class 2, under 6.5W |
| Connector | RJ45 |
| Dimensions | 4.21 x 1.1 in (107 x 28 mm) |
| Weight | 1.5 lb (0.68 kg) |
| Included | Mounting stem, strain relief cap, 10 ft (3 m) CAT6 cable |
| Certification | Certified for Microsoft Teams; Zoom certified; Works with Google Meet |
Tell us the table length and we will check the pickup, or see the rest of the audio range.